+86-474-4860105

Application of Polyvinylpyrrolidone PVP in Water Treatment Membrane

Dec 01, 2021

Polyvinylpyrrolidone (PVP) is a water-soluble polymer with excellent hydrophilicity. The addition of PVP can greatly improve the hydrophilicity of polyvinylidene fluoride (PVDF), polyethersulfone (PES), polysulfone (PS), etc.


1. Summary

According to the pore size of the membrane, there are microfiltration, ultrafiltration, reverse osmosis, dialysis membrane, permeable gasification membrane, gas separation membrane, and ion separation membrane. The mechanism of microfiltration and ultrafiltration is the sieving mechanism, and the others are the dissolution and diffusion mechanisms. According to the structure, it can be divided into two types: symmetric membrane and asymmetric membrane. Film-forming methods currently mainly include the phase inversion method, melt stretching method, track etching method, and sintering method of inorganic film. The phase inversion method is the most widely used method for preparing microfiltration and ultrafiltration membranes. The phase inversion method is to prepare a homogeneous polymer solution of a certain composition, and change the thermodynamic state of the solution through a certain physical method so that it is phase-separated from the homogeneous polymer solution, and finally transformed into a three-dimensional macromolecular network type condensation. Glue structure. This three-dimensional network-like macromolecular gel constitutes the separation membrane.

The phase inversion method can be divided into solvent evaporation phase inversion method, thermally induced phase inversion method, vapor deposition phase inversion method, and immersion precipitation phase inversion method according to different thermodynamic properties of the changed solution. Among them, the immersion precipitation phase conversion method has the simplest preparation process and can better adjust the performance and structure of the membrane. It is the most extensive method for preparing ultrafiltration and microfiltration. Among them, the membrane molecular weight cut-off of the ultrafiltration membrane is 1000-100000.

Geographical advantage

2. Factors affecting membrane performance

The four aspects of the composition of the casting solution, the conditions of the membrane, the temperature and composition of the gel bath, and the composition of the pore former affect the performance of the membrane, which is mainly reflected in the mass transfer rate. Among them, the porogen affects the phase separation thermodynamics and mass transfer kinetics of the liquid casting membrane system, thereby affecting the film formation process and changing the membrane structure.

PVPK30 Powder

3. PVP pore formation mechanism

When PVP is used as a porogen, it will be concentrated on the surface of the membrane. When the surface of the membrane is in contact with water, PVP will dissolve in the water to form a channel for non-solvents to enter the membrane. These points constitute the growth points of the finger-like pores. , In the subsequent process, grow to the membrane matrix to form finger-like pores. In the end, the polymer dense phase is formed into a film, and the polymer dilute phase is eluted (PVP).

Company1

4. Add ratio

The proportion of PVP added is generally 2-8 wt% (the interval is not fixed, it should be determined according to the specific film forming conditions). Increasing the addition amount will increase the porosity of the membrane, but reduce the strength and hydrophobicity of the membrane, which will affect the performance of the membrane.


Send Inquiry